Un hack assez mignon pour identifier facilement les commandes que j'ajoute dans mon ~/bin/

Ca va bien m'aider pour Ansibler mon Thunderbird sous Linux ...

Enfin ! Un exemple concret de configuration automatique de Thunderbird ! Je vais pouvoir en faire quelque chose !

Il semble donc qu'il existe une solution - terriblement cachée - pour configurer Thunderbird sur une machine. Mais pour l'instant, je ne vois pas la possibilité d'ajouter un compte mail par ce moyen. Bon, l'avantage, c'est que ça marche aussi bien sous Windows que sous Linux ...

This guide is intended to provide technical guidance to design, configure and operate the Profiling feature in the Cisco Identity Services Engine (ISE). The document provides best practice configurations for a typical environment.

Setting up a PI 3 for Docker is already described in several posts on the great wide internet. Below I will describe the method I used including the links for that. No need to reinvent the wheel now is there!

The "open Home Automation Bus" (openHAB) is an open source, technology agnostic home automation platform which runs as the center of your smart home. Besides 200 other add-ons for all kinds of technologies, openHAB provides an MQTT add-on ("binding") to interface with systems like Tasmota.

By following the guide below you'll be able to observe, control and manage your Tasmotamodules from your openHAB system. If you are new to openHAB, please learn about the basic concepts and the initial setup. The below article will not cover any basics which are out of scope to the Tasmota integration.